Tascam CC-222MK CD Player User Manual


  Open as PDF
of 36
 
28 TASCAM CC-222MKIII
Erasing tracks
It is possible to erase the last recorded track, the last
two recorded tracks, the last three recorded tracks, etc.
It is not, however, possible to erase tracks in the “mid-
dle” of the disc.
1 Withthediscloaded,andtheunitinstopmode,
presstheERASEkey.
2 IfthedisplaydoesnotshowERASE XX-XX?,
whereXX-XXisthenumberofthelasttrack
recordedonthedisc,turntheMULTI DIALoruse
the SKIPkeysuntilitisdisplayed.
3 TurntheMULTI DIALorusetheSKIPkeysto
changethenumberofthersttracktobeerased.
Thehighestvaluethatthisnumbercantakeis
thelasttrackrecorded(forexample,if17tracks
havebeenrecordedonthedisc,17-17meansthat
thelasttrackonly,number17,willbeerased).
Thelowestvaluethatthisnumbercantakeis2
(ifthisnumberwas1,thewholediscwouldbe
erased,asdescribedbelow).Ifyoudonotwant
toproceedwiththeeraseoperation,pressthe
ERASEkeyorSTOPkey.
NOTE
If only one track has been recorded on the disc,
only the “erase disc” option (see “Erasing a whole
disc”on page 28) is available.
4 Whentherangeoftrackstobeerasedhasbeen
selected,presstheMULTI DIALortheENTER
key.
NOTE
This operation cannot be undone. If you are going
to erase a track or tracks, make sure that they are
recordings that you really want to erase!
Iftheeraseoperationhasbeenselected,theword
ERASEashesonthedisplay,andthetimerstarts
countingdown.
Attheendofthecountdownperiod,theword
Completeappearsbrieyonthedisplay,andthe
displayreturnstothetrack/timedisplay.
Erasing a whole disc
When you want to erase a whole disc (all the tracks on a
disc), follow the procedure below:
1 Withthediscloaded,andtheunitinstopmode,
presstheERASEkey.
2 TurntheMULTI DIALorusetheSKIPkeysuntil
thedisplayshowsERASE DISC?.
Ifyoudonotwanttoproceedwiththeeraseop-
eration,pressthe ERASEkeyorSTOPkey.
3 Toerasethecontentsofthedisc,presstheMULTI
DIALortheENTERkey.
NOTE
This operation cannot be undone. If you are going
to erase a disc, make sure that it contains only
recordings that you really want to erase!
Iftheeraseoperationhasbeenselected,theword
ERASEashesonthedisplay,andthetimerstarts
countingdownatimevalueshownonthedis-
play.
Attheendofthecountdownperiod,theword
Completeappearsbrieyonthedisplay,andthe
displayreturnstothetrack/timedisplay.
Refreshing a disc
If a CD-RW disc has been corrupted at any point (e.g.
power has been cut off in the middle of a finalize opera-
tion, etc.), or has been used in a computer or another
piece of equipment that makes it unreadable, it is pos-
sible to “refresh” the disc to make it usable again.
1 Withthediscloaded,andtheunitinstopmode,
presstheERASEkey.
2 TurntheMULTI DIALorusetheSKIPkeysuntil
thedisplayshowsDISC REFRESH?.
3 Torefreshthedisc,presstheMULTI DIALorthe
ENTERkey.
Ifyoudonotwanttoproceedwiththerefresh
operation,pressthe ERASEkeyorSTOPkey.
NOTE
This operation cannot be undone. If you are going
to refresh a disc, make sure that it contains only
recordings that you really want to erase!
Iftherefreshoperationhasbeenselected,the
wordsERASE XX:XXareshownonthedisplay,
andthetimerstartscountingdown.
Attheendofthecountdownperiod,theword
Completeappearsbrieyonthedisplay,and
thedisplayreturnstothetrack/timedisplay(of
course,therearenotracks,andthediscisatthe
start,withthetotaltimeofthediscavailablefor
recording).
6- After recording After recording
 previous next