Tascam CC-222MK CD Player User Manual


  Open as PDF
of 36
 
TASCAM CC-222MKIII 17
Playback modes
The unit can be set to play back a single track, the
whole disc in the created order, the tracks of the disc in
a random (shuffled) order, or a programmed order. This
operation takes place when stopped.
NOTE
Selecting the playback mode is only possible using
the remote control unit.
1 Whenstopped,pressthePLAY MODEkeyonthe
remotecontrolrepeatedlytocyclethedisplay
throughthefollowing:
• Continue. Normal playback mode. Playback con-
tinues in the normal order.
• Single. The currently selected track is played and
then playback stops. The SINGLE indicator lights in
this mode.
• Random. In this mode, all the tracks on the disc are
played in random order, and the RANDOM indicator
lights (see “Random playback” on page 17 below).
• Program. The PROGRAM indicator lights in this mode
(see “Program playback” on page 17 below).
The selected mode is shown in large characters dis-
appears from the display a few seconds after selecting
the mode, and the display returns to its previous mode.
Program playback
The steps to set up to 99 program steps (tracks) to be
played back in a specified order are as follows:
1 Whenstopped,pressthePLAY MODEkeyuntil
thedisplayshowsProgram.
2 Thedisplaychangestoshow0Tr 00:00 00,
meaningthattherearenotracksassignedfor
programplayback.
3 Usethenumberkeysontheremotecontrolto
enteratracknumber.Thereisnoneedtopress
the ENTER key.
Thetrackenteredisassignedtotheprogram
step,andthedisplaychanges,showingthetrack
number,thetotaltimeoftheprogramsofar,and
thestepnumber,e.g.2Tr 14:56 03.
4 Thenextprogramstepcanthenbeentered.
NOTE
Steps 3 and 4 above can also be carried out from
the main unit by turning and pushing the MULTI
DIAL key.
5 Repeatsteps3and4aboveuntiltheprogramis
complete.
6 PressthePLAYkeytostartplaybackattherst
programstep.
 Thedisplayshowsthetrack,thecurrenttimedis-
play,andtheprogramstepnumber.
Whileinprogramplaybackmode,usingtheSKIP
keysortheMULTI DIALmovesbackwardsand
forwardsintheordersetintheprogram.
Use the PAUSE key to stop playback temporarily or the
STOP key to stop playback of the program. If the STOP
key is used, when playback is restarted, it starts from
the first program step.
When stopped, if the CLEAR key on the remote control
is pressed, it cancels the last track entered in the pro-
gram.
Clear the program by pressing the PLAY MODE
until the display shows Continue. The program is
also cleared when the disc tray is opened, and if the
STOP key is pressed when playback is stopped in pro-
grammed order mode.
The programmed play order is not memorized when the
power is turned off.
If you enter more than 99 program steps, the message
PGM Full ! appears on the display.
If the total time programmed goes over 100 minutes,
the message --:-- appears on the display.
In this mode, the unit will playback all the tracks on the
disc in random order.
1 Whenstopped,pressthePLAY MODEkeyuntil
thedisplayshowsRandom.
2 PressthePLAYkeytostartrandomplayback.
Whileplayingback,usingthetrackskipfunc-
tionwillmoveforwardsthroughtherandom
order.TurntheMULTI DIAL ontheunitclock-
wiseorpresstheSKIP(¯)keyontheremote
control.
NOTE
You cannot go backwards to previous tracks in the
Random playback mode.
To stop random playback, press the STOP key. Opening
the disc tray also stops random playback.
Random playback
4- Disc operations Disc operations
 previous next