Filter
Top Products
5
SCANNING OPERATION
37
■ Before scanning
Set the following conditions before
scanning.
INFORMATION
What happens when you rotate the tun-
ing dial during scanning?
While scanning—
Scanning direction is changed.
Example:
If you rotate [DIAL] counterclockwise
while scanning up (frequency/memory
channel number increase), scan
changes to down scanning (fre-
quency/memory channel number de-
crease).
While pausing—
Scanning starts again (pause is can-
celled).
1. Set receive mode
Set any receive mode EXCEPT USB,
LSB and CW.
The squelch control activates for RF
gain control while USB, LSB, or CW
mode is selected. RF gain control
does not activate for audio noise
muting, therefore, the receiver is in a
busy condition at all times. In such
case, searching speed is either very
slow or searching doesn’t even start.
2. Set the volume and
squelch levels
Set [VOL] to a suitable audio output
level.
Set [SQL] so that the noise audio is
just muted.