Filter
Top Products
MEMORY MODE
4
23
■ General
What is memory mode?
MEMORY mode is the second operating mode—the first
being VFO mode. MEMORY mode is used to store often-
used frequencies, their receive modes, attenuator settings
(p. 65), as well as skip information for scanning (p. 56). This
provides convenient recall and scanning capabilities. Also,
frequencies are receivable in MEMORY mode which means
you can listen to received signals while you are in MEMORY
mode.
The IC-R10 has 1000 memory channels for your conve-
nience. They are divided into 18 banks: BANKS A to P con-
tain 50 channels each for normal usage, while BANKS Q and
R contain 100 channels each for auto-memory write scan
(p. 41) and program skip scan (p. 45), respectively.
Each BANK and memory channel has BANK or memory
name capabilities, for convenience. BANK names can be up
to 10 characters; channel names up to 8 characters.
Programmed contents and names can be easily copied to
other channels using the memory copy function (p. 33) and
easily edited using the EDIT function (p. 51).
■ Selecting MEMORY mode
Select MEMORY mode
Push [V/M] to select MEMORY mode.
•“MEMO” appears in the function display.
•Push [V/M] again to return to VFO mode.
MEMO
FM
A00 144.0000
Appears