Filter
Top Products
3
BASIC OPERATION
19
■ Listening example 1— television broadcast in WFM mode
1. Turn power ON
Push [POWER] for 1 sec. to turn
power ON.
2. Select VFO
Push [CLR] or [V/M] to select VFO
mode.
3. Adjust volume
Rotate [VOL] to obtain the desired
level of audio output.
4. Adjust squelch
Rotate [SQL] fully counterclockwise,
then clockwise until the audio noise
just disappears.
5. Select the receive
mode
Television sound is broadcast in
WFM mode. If the receiver is not al-
ready in WFM mode:
Push [MODE] one or more times until
WFM appears in the function display.
6. Select the tuning step
In most countries* television stations
are spaced about 50 kHz apart. To
select the 50 kHz tuning step:
While pushing [FUNC], push
[
(MODE)TS], then rotate [DIAL] until
the function display shows “50 kHz”.
Push [CLR] after setting to return to
VFO mode.
*Check listings for your area.
VFO
WFM
TS 50.00kHz
SET TS
TS 50.00kHz
[DIAL]
VFO
WFM
144.0000
Appears
MODE