Filter
Top Products
RWARNING! NEVER connect the receiver to an AC
outlet. This may pose a fire hazard or result in an electric
shock.
RWARNING! NEVER operate the receiver with a
headset or other audio accessories at high volume levels.
Hearing experts advise against continuous high volume op-
eration. If you experience a ringing in your ears, reduce the
volume level or discontinue use.
NEVER connect the receiver to a power source of more
than 16 V DC such as a 24 V battery. This connection will ruin
the receiver.
NEVER cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting,
the receiver might be damaged.
NEVER expose the receiver to rain, snow or any liquids.
DO NOT connect the receiver to a power source using re-
verse polarity. This connection will not only blow fuses but
also may damage the receiver.
i
Versions of the IC-R10 which display the “CE” symbol on
the serial number seal, comply with the ETSI specifica-
tion prETS300 684 (EMC product standard for
Commercially Available Amateur Radio Equipment).
CAUTIONSIMPORTANT
READ ALL INSTRUCTIONS CAREFULLY be-
fore attempting to operate the receiver.
SAVE THIS INSTRUCTION MANUAL— This
instruction manual contains important safety and operating in-
structions for the IC-R10.
EXPLICIT DEFINITIONS
The following explicit definitions apply to this manual.
WORD DEFINITION
RWARNING
Personal injury, fire hazard or electric shock
may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.