Filter
Top Products
1. BANK and memory
channel setting
q Select MEMORY mode (p. 23).
w Set the BANK and memory chan-
nel number (p. 24) you want to
program to.
2. Setting other
information
q Select VFO mode (p. 11).
w Set the frequency and receive
mode (p. 12) you want in VFO
mode.
4
MEMORY MODE
25
■ Programming a memory channel — 1
This is the quickest way to memorize a
received frequency, along with its re-
ceive mode and other information.
When you memorize the frequency in
this way, the previously memorized data
is replaced with the new data. If you do
not want to lose the previously memo-
rized data, select a blank channel num-
ber before programming (p. 24).
3. Programming
While pushing [FUNC], push
[
(V/M)MW] to program the data.
•When programming is successfully
completed, 3 beeps sound.