Filter
Top Products
3
BASIC OPERATION
17
■ Band scope function
What is the band scope function?
The band scope detects signal availability in the range of ±5
channels (up to ±100 kHz) from the displayed frequency, and
displays the result on the multi function dot-matrix display.
This gives you a visual reference of current band conditions.
In this case, channel refers to sweep step or channel space
according to the set tuning step. For example, when the tun-
ing step is set to 5 kHz, the band scope detects 25 kHz above
and below the displayed frequency, then displays the result
on the LCD.
When the tuning step is set above 20 kHz, the band scope
function automatically changes its sweep step to 20 kHz.
However, when the sweep step is changed to 20 kHz, the
tuning step remains the same.
Also, when a user-programmable tuning step is selected, the
band scope function automatically selects the 20 kHz sweep
step.
Preparation
The band scope function is activated only when FM receive
mode is selected in VFO mode.
q Push [V/M] to select VFO mode. (p. 11)
w Push [MODE] one or more times to select FM mode.
(p. 12)
e While pushing [FUNC], push [
(MODE)TS]
r Rotate [DIAL] to select the tuning/sweep step.
t Push [CLR] to return to VFO mode.
1
2
3
3
4
5