Filter
Top Products
1. Setting receive
conditions
q Select VFO mode (p. 11).
w Set the frequency and receive
mode (p. 12).
2. BANK and memory
channel setting
While pushing
[FUNC], push
[
(V/M)
MW].
4
MEMORY MODE
26
■ Programming a memory channel — 2
This is the simplest method to memo-
rize the received frequency along with
its receive mode and other information.
4. Programming
While pushing [FUNC], push
[
(V/M)MW] for 2 sec. to program the
data.
•When programming is successfully
completed, 3 beeps sound and VFO
mode is automatically selected.
3. BANK and memory
channel setting
q While pushing [FUNC], rotate
[DIAL] to select the BANK you
want to program into.
w Rotate [DIAL] to select the mem-
ory channel you want to program.
1
1
2