Filter
Top Products
62
The primary requirements for accessing the DVR via the Internet are:
A High-Speed Internet Connection
Video uses a lot of data, so you’ll need a fast Internet connection in order to get
smooth playback and monitoring remotely. Note that upload speed refers to the
rate at which an Internet connection can send data, not receive it. Most Internet
connections are ‘asymmetrical’, which means they can download data faster than
they can upload it. We think that an Internet connection with an upload speed of
256kpbs is generally sucient for remote access, but ideally upload speeds of
512kbps or higher are recommended - particularly for multi-channel playback or
monitoring at higher resolutions and quality settings.
Your DVR & Local Network Correctly Congured
It is important that your local network function correctly, and that the information
entered into the Networking menu in the DVR (see “Network Menu” on page 30)
matches the general network settings.
The rst thing you’ll need to determine is whether your router requires devices to use
xed (STATIC) or dynamic (DHCP) addressing. Some routers can use either method,
whilst some only support DHCP, and others only support STATIC. If your router
supports it, we recommend using DHCP addressing with UPnP enabled, as it makes
locating the DVR from other devices on your network easier.
In a DHCP conguration, you do not need to enter the IP address, subnet mask or
default gateway values into the DVR - the router will automatically assign these.
For a STATIC conguration, the DVR needs to be told what IP address to use (this must
be unique) and the subnet mask, gateway address and DNS server address (these must
match the other devices on your network). The most common way of discovering these
values is to use a computer already connected to the network, which can access the
Internet.
Remote Access