Filter
Top Products
14
IMPORTANT - Remembering to Apply Your Changes
When you’re using the menus to change settings or values, you should click “Apply”
in the bottom right corner to save your changes.
If you do not click “Apply,” a window will pop up asking whether you want to save
your changes. Choose “OK” to save the changes or choose “CANCEL” to discard them.
Always select the APPLY button before leaving a menu
or OK from the Save Changes dialog window upon exit
if you want to save the changes that you have made.
There are two reasons why any changes to your settings must be conrmed. For one,
it helps prevent accidental modication of the DVR’s settings while you’re navigating
other menus or similar. Secondly, the DVR only checks and loads the settings you’ve
modied when the apply button is pressed or you conrm the change upon exit. This
is important to prevent the DVR operating erratically or performing an unintended
operation whilst settings are in the process of being modied.
Note that the “Date and Time Menu” on page 52 will not ask you to conrm your
changes. This is to prevent an incorrect time accidentally being selected, as this can
have major consequences.
Using the On-Screen Keyboard
As the DVR doesn’t have a keyboard, when you have to enter text the DVR will present
you an on-screen ‘keyboard’. This will automatically appear when you select a text
eld which allows you to enter a value.
Navigating the Menus