Filter
Top Products
The Timer
37
GB
To check/change the waking up
timer settings
Press CLOCK/SLEEP/TIMER until “Timer
Set” appears in the display, then press
YES•ENTER. Each time you press
YES•ENTER, a stored setting is displayed in
the set order. To change the setting, display
the setting you want to change and re-enter
it.
To use the player before a timer
playback starts
If you turn on the player, you can use it as
usual (in case of the radio, if you listen to the
station which is different from the one you
tuned in step 1 on page 36, you will hear that
station at the preset time). Turn off the
player before the preset time.
To stop play
Turn off the power.
Notes
• You cannot preset waking up timer and
recording timer (page 38) at the same time.
• When playing the sound of the component
connected to the LINE IN jack of the player,
refer to the operating instructions of the
component.
Tips
• If you made a mistake, press NO•CANCEL. The
setting entered last will be cleared. Re-enter it.
• To exit the standby mode, press STANDBY to
make “TIMER” disappear from the display.
• The preset settings remain until you reset them.
• As long as the indication appears in the
display, the player is in timer mode.
Falling asleep to music
You can set the player to turn off
automatically after 10, 20, 30, 60, 90 and
120 minutes, allowing you to fall asleep
while listening to music.
1 Play the music source you want.
2 Press CLOCK/SLEEP/TIMER until
“Sleep Set” appears in the display, and
press YES•ENTER.
3 Turn the jog dial to select the minutes
for the sleeping timer.
The indication changes as follows:
“60” t “90” t “120” t Off t
“10” t “20” t “30”.
If 8 seconds have passed after you turn
the jog dial, the minutes in the display
are entered.
The preset time has passed, the player
goes off automatically.
continued
CLOCK/SLEEP/TIMER
YES
ENTER
Jog dial