Filter
Top Products
The Radio
17
GB
The Radio
Presetting radio
stations
You can store radio stations into the player’s
memory. You can preset up to 40 stations,
20 for FM and 10 each for MW and LW in
any order.
YES
ENTER
1 Press RADIO BAND•AUTO PRESET
until the band you want appears in the
display.
2 Hold down RADIO BAND•AUTO
PRESET until “Auto Preset” flashes in
the display.
3 Press YES•ENTER.
The stations are stored in memory from
the lower frequencies (from the preset
number 1, in numerical order) as long as
the station has a signal strong enough.
When you’ve done presetting, the
station stored in the preset number 1
will be tuned in automatically.
EDIT
RADIO
BAND
AUTO PRESET
If a station cannot be preset
automatically
You need to preset a station with a weak
signal manually. Also, when you want to
replace preset stations with a new one,
proceed as follows:
1 Press RADIO BAND•AUTO PRESET
until the band you want appears in the
display.
2 Press TUNE + or TUNE – repeatedly until
you tune in the station you want, and then,
hold down YES•ENTER for 2 seconds.
3 Select the preset number you want to
preset the new station on by turning the
jog dial.
4 Press YES•ENTER.
The new station replaces the old one.
On the remote
1 Press BAND until the band you want appears in
the display.
2 Press TUNE + or – until you tune in the station
you want.
3 Hold down the number/character button that you
want to preset the new station on for 2 seconds.
To select the preset number over 10, press >10
first, then the corresponding number buttons.
You need to hold down the last number button to
enter for about 2 seconds. (Example: To select
12, press >10 and 1 first, then hold down 2 for
about 2 seconds.)
Jog dial