Sony ZS-M30 MiniDisc Player User Manual


 
20
GB
Recording the tracks
you programmed
(Synchronized recording of the tracks
you programmed)
You can record the tracks you programmed
up to 20 tracks.
MODE
1 Insert a recordable MD.
2 Insert the CD you want to record and
press CD x.
3 Press MODE until PGM appears in
the display.
4 Turn the jog dial to select the track you
want to programme, and press YES
ENTER.
Repeat this step.
SYNCHRO REC
CD N MD
YES
ENTER
NO
CANCEL
Programmed track
Playing
order
Total programmed
time
CD x
5 Press SYNCHRO REC CD N MD.
The player starts recording
automatically.
If the MD has any previous recording,
recording will be made from the last
recorded position.
If CD>MD OK? alternates with
time display
There is not enough space on the MD to
record the whole programme.
If it is all right to record as much as possible
and cancel recording of some tracks, press
YESENTER. To stop recording, press
NOCANCEL.
If any other messages are displayed, see
page 51.
Notes
After you stop recording,
do not disconnect the
mains lead or move the player while
TOC EDIT is flashing in the display. If
you do so, recording may not be done properly.
If you turn up the volume too high, sound
skipping may occur.
Tips
If you made a mistake, press NOCANCEL and
re-enter the track number using the jog dial and
YESENTER.
To record over the previous recording, see page
24.
Once the clock is set, the recording date and
time are stamped automatically (page 35).
You can label the MD and the track during
recording (page 30).
When recording the tracks you programmed,
you cannot use the high-speed recording
function.
Jog dial