Filter
Top Products
36
GB
Before you begin, make sure “TIMER” is
not displayed. If displayed, press
STANDBY.
1 Prepare the music source you want to
play.
Source Do this
MD Insert an MD.
CD Insert a CD.
RADIO Tune in the station.
GAME (LINE) Turn on the component
connected to LINE IN.
2 Press CLOCK/SLEEP/TIMER until
“Timer Set” appears in the display, and
press YES•ENTER.
“TIMER” flashes in the display.
Make the following settings by
checking the indications in the display.
Waking up to music
You can wake up to music or a radio
programme at a preset time.
Make sure you have set the clock (see
“Setting the clock” on page 35).
YES
ENTER
3 Turn the jog dial until “PLAY” flashes
in the display, and press YES•ENTER.
“MD”, “CD”, “RADIO” or “LINE”
flashes in the display.
4 Turn the jog until the music source you
want to play (“MD”, “CD”, “RADIO”
or “LINE”) appears in the display, and
press YES•ENTER.
5 Set the timer to the hour and the
minutes you want the music to go on.
1 Turn the jog dial to set the hour and
press YES•ENTER.
2 Turn the jog dial to set the minutes
and press YES•ENTER.
6 Set the timer to the hour and the
minutes you want the music to go off
(Do as step 5.).
7 Turn the jog dial to set the volume you
want, and press YES•ENTER.
8 Press STANDBY.
“TIMER” lights up; the player enters
the standby mode.
At the preset time, the power will go on
and music will play. Then the power
will go off at the preset time, and the
player will enter the standby mode
again.
STANDBY
CLOCK/SLEEP/TIMER
Jog dial
NO
CANCEL