Filter
Top Products
Recording
23
GB
4 Turn the hog dial until “Mono REC”
flashes in the display, and press
YES•ENTER.
The player stands by for recording.
5 Press MD u (MD N or MD X on
the remote).
Recording will be made from the last
recorded position.
6 Play the sound source.
Recording from the CD: Press CD u.
Recording from the connected
component : Play the component
connected to the LINE IN jack.
To stop recording
Press MD x.
To pause recording
Press MD u (MD X on the remote). Press
the button again to resume recording.
Notes
• After you stop recording,
do not disconnect the
mains lead or move the player while
“TOC EDIT” is flashing in the display. If
you do so, recording may not be done properly.
• While recording from radio, you cannot change
the station.
• If you turn up the volume too high, sound
skipping may occur.
Tips
• To record over the previous recording, see page
24.
• To add track marks during recording, press
REC•REC MODE where you want to add track
marks.
• To add track marks after recording, see
“Dividing a recorded track into two tracks” on
page 27.
• Once you stopped recording by pressing MD x,
the player switches back to stereo recording
when you record the next time.
• If you record a stereo source in monaural, the
sounds from left and right will be mixed.
• The MDs recorded in monaural using this player
can be played back only with an MD player/
recorder that has the monaural playing function.
• When recording in monaural, you cannot use the
high-speed recording function.