Filter
Top Products
Recording
21
GB
Recording from the
radio or a CD
You can record from the radio or a CD to an
MD using the REC•REC MODE button.
You can start or stop recording at any point
you want. You can also pause recording.
RADIO
BAND
AUTO PRESET
Recording from the radio
1 Tune in the station you want to record
from.
2 Insert a recordable MD.
3 Press REC•REC MODE (z on the
remote).
The player stands by for recording.
4 Press MD u (MD N or MD X on
the remote).
Recording will be made from the last
recorded position.
To stop recording
Press MD x.
REC
REC MODE
CD x
MD u
CD u
To pause recording
Press MD u (MD X on the remote). Press
the button again to resume recording.
Notes
• After you stop recording,
do not disconnect the
mains lead or move the player while
“TOC EDIT” is flashing in the display. If
you do so, recording may not be done properly.
• While recording from radio, you cannot change
the station.
• If you turn up the volume too high, sound
skipping may occur.
Tips
• To record over the previous recording, see page
24.
• To add track marks during recording, press
REC•REC MODE where you want to add track
marks.
• To add track marks after recording, see
“Dividing a recorded track into two tracks” on
page 27.
• When recording from the radio, you cannot use
the high-speed recording function.
Recording from a CD
Track marks on the source CD are recorded
on the same positions on the MD. Track
marks are also added automatically on the
MD when you pause recording.
If unnecessary track marks are added, erase
them after recording (see “Combining two
adjacent tracks into a single one” on page
28).
1 Insert a CD.
2 Press CD x to activate the CD player.
3 Insert a recordable MD.
Jog dial
continued