Filter
Top Products
59
Optional Components
Connecting another tape deck,
TV, VCR, etc.
Connect the component to the AUX IN and OUT
jacks on the rear panel of the tuner.
continued
Tip
Switch the function to “TAPE” when listening to or
recording the sound of the TC-SP55 tape deck.
To the audio input
of an analogue
component
To the audio output
of an analogue
component
Tips
• Switch the function to “AUX” when listening to or
recording the sound of the connected components.
• When making a recording, start the recording after
“D-IN” changes to “A-IN”.
To attenuate the distortion from
the connected components
You can change the audio input level for the AUX
input jacks between two levels.
If the sound from a connected component is
distorted, reduce the input level.
1 Turn FUNCTION until “AUX” appears.
2 Press @/1 to turn off the system.
3 While holding down DSG ON/OFF, press @/1
to turn on the system.
“AUX ATT” appears in the display.
When the volume is too low, do steps 1 to 3 again
to reset to the original level.
Tuner
Tape deck
MD deck