Filter
Top Products
The MD Deck — Recording
27
Recording from the
radio
— Manual Recording
You can make an analogue recording of a radio
programme on an MD.
3
56
42
1 Insert a recordable MD.
2 Press TUNER/BAND repeatedly to
select “AM” or “FM”.
3 Press TUNING MODE repeatedly until
“PRESET” appears.
4 Press TUNING + or – to select the
desired preset station.
To preset radio stations, see page 46.
Preset number and frequency (or station
name* or RDS station name**)
*
The station name appears only if you have
labelled the station (see page 49).
**
European model only.
5 Press z REC.
The z REC indicator lights up.
The MD deck stands by for recording.
6 Press H on the MD deck.
Recording starts.
To Do this
Stop recording Press s on the MD deck.
Pause Press S on the MD deck.
Press S again or H on the
MD deck to restart recording.
Remove the MD Press A on the MD deck in
stop mode.
Tips
• If you use a partially recorded MD, recording starts
after the recorded tracks. To erase the recorded
contents, see “Erasing recordings” on page 38.
• If noise is heard while recording an AM radio
programme, move the AM loop aerial to reduce the
noise or connect a ground wire to the U terminal
(see page 61).
Note
If the MD is record protected, “C11” and “Protected”
appear alternately and the MD cannot be recorded.
Remove the MD, then slide the record protection tab
to the closed position (see page 22).