Filter
Top Products
32
Marking track numbers at a
specific point during
recording
— Track Mark
You can mark track numbers at any time during
recording, regardless of the type of sound source.
z REC
, Press z REC during recording at the
point you want to add a track mark.
The tracks following the added one are
renumbered.
Marking track numbers
(continued)
Adjusting the recording
level
When recording on an MD, you can adjust the
recording level to the desired volume. You can
adjust the recording level not only when making
an analogue recording, but also when making a
digital recording from a CD, etc.
Once adjusted, the recording level is maintained
until you adjust it again.
1,2,4
2,3
1,5
1 Press MENU/NO during recording
pause to display “MD Setup ?”, then
press ENTER/YES.
2 Turn l/L until “Level Adjust”
appears, then press ENTER/YES.