Filter
Top Products
55
Timer/Other Features
Tips
• The system automatically turns on about 30 seconds
before the start time and prepares for timer-
recording. Recording starts as soon as the system is
ready, so recording may start earlier than the preset
time.
• When you record from the radio, the station name
(see page 49, or frequency when the station is not
labelled), the start time and the stop time are
automatically recorded on the MD.
Notes
• You cannot activate Daily Timer and the recording
timer at the same time.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
• If the system is on about 30 seconds before the
preset time, the timer-recording will not be
activated.
• The Smart Space and Level Synchro Recording
functions do not operate.
• The volume is reduced to minimum during
recording.
When you press ENTER/YES, the start time,
stop time and other setting contents appear in
turn, then the original display returns.
“REC” lights up.
Note
You cannot activate another tape deck (except
for the optional tape deck TC-SP55) with this
system’s recording timer.
7 Insert a recordable MD or tape.
If you use a partially recorded MD, recording
starts after the recorded tracks.
8 Press ?/1 to turn off the system.
To cancel the procedure
Press CLOCK/TIMER SET.
To change the setting
Start over from step 1.
To check the setting/activate
the timer
Press CLOCK/TIMER SELECT and press .
or > repeatedly until “SEL MD REC” (or “SEL
TAPE REC” when using the optional tape deck
TC-SP55) appears.
Then press ENTER/YES.
It is not necessary to set the start and stop times
every time.
To cancel the timer
Press CLOCK/TIMER SELECT and press .
or > repeatedly until “TIMER OFF” appears.
Then press ENTER/YES.