Filter
Top Products
57
Timer/Other Features/Optional Components
1 Connect an optical cable (square optical
connector, not supplied).
AUX
IN 2
AUX
IN 2
Optional Components
Connecting a digital
component
Connect the digital component using audio cords
(not supplied) and an optical cable (square optical
connector, not supplied). The digital audio signal
from the connected component is digitally
recorded to the MD.
The analogue connection is for monitoring the
audio, and the digital connection is for recording.
If there is no analogue connection, no sound will
be produced from the speaker. The digital audio
signal from the connected component is recorded
to the MD. However, if the digital component is
not connected to the DIGITAL OPTICAL AUX
IN, the audio connected to the AUX IN (analogue)
will be recorded as an analogue signal.
Also refer to the operating instructions for each
component.
To the audio output of a digital component
To the digital optical output of a digital
component
1 Take the cap off the
DIGITAL OPTICAL
AUX IN.
2 Connect an
optical cable.
3 Connect the cable to the
digital optical output of a
digital component.
2 Connect an audio cords (not supplied).
SYSTEM CONTROL 2
SYSTEM CONTROL 1
IN
OUT
R
L
Connect the cords to the audio
output of a digital component.
Tip
Switch the function to “AUX” when listening to or
recording the sound of connected components.
continued