Filter
Top Products
The MD Deck — Recording
33
continued
3 Turn l/L to adjust the recording
level.
The sound source and recording level are
displayed. The recording level can be
adjusted from –12 to +12. While monitoring
the sound, adjust to the optimum level while
making sure that “OVER” does not appear in
the display at the loudest portion.
Adjust the level so that “OVER”
does not appear
4 Press ENTER/YES.
5 Press MENU/NO.
Notes
• If you adjust the recording level during recording
such as part-way through a track, the recorded
volume changes at the point where the adjustment
was performed.
• If “OVER” appears in the display when the
recording level is between –12 and 0, change the
audio input level and reduce the input sound (see
page 59).
Monaural recording
Stereo signals such as an FM stereo broadcast can
be converted to monaural format and recorded.
When recording in monaural format, the MD
recording time is approximately twice the normal
recording (stereo recording) time (i.e., 120
minutes of monaural audio can be recorded on a
60-minute MD).
1,5
2,3,4
6
2
2,3,4
7
1 Turn FUNCTION until “MD” appears.
2 Press MENU/NO in stop mode to
display “MD Edit Menu”, and turn
l/L until “MD Setup ?” appears.
Then press ENTER/YES.