Filter
Top Products
The MD Deck — Editing
43
To return to the condition before
Divide
You can return to the original condition
immediately after dividing the tracks by using the
Undo function (see page 45). You can also return
to the original condition by using the Combine
function (see page 44).
Notes
• If you divide a labelled track into two tracks, only
the first track retains the track title.
Example:
12
12
43
3
45
Andante
Andante Adagio
Adagio Allegro
Allegro
The new track is not labelled
• “Impossible” appears when you specify the division
point at the beginning or end of a track. Press .
or > to shift the position.
1 Press MD to switch the function to MD.
2 Press MENU/NO to display “MD Edit
Menu”.
3 Press . or > repeatedly until
“MD Divide ?” appears, then press
ENTER/YES.
4 Press . or > repeatedly until the
desired track number to divide appears,
then press ENTER/YES.
“MD - Rehearsal -” appears and the portion
to be divided is played repeatedly.
5 While monitoring the sound, press .
or > repeatedly to adjust the point to
be divided.
You can shift the point by 1/86 second
(1 frame) intervals.
To shift the point by second or minute
intervals, press m or M so that “s” or
“m” flashes, then press . or >.
6 Press ENTER/YES.
“MD Complete!!” appears for a few seconds
and the newly created track starts playing.
To cancel dividing
Press MENU/NO before completing the
procedure.