Filter
Top Products
50
Labelling the preset stations
(continued)
8 Repeat steps 5 to 7 to complete the
entire title.
If you made a mistake
Press CURSORT or t until the character
you want to change flashes, then repeat steps
5 to 7.
To erase a character
Press CURSORT or t until the character
you want to erase flashes, then press
CLEAR.
9 Press ENTER/YES to complete the
labelling procedure.
To cancel labelling
Press MENU/NO before completing the
procedure.
To check the station name
Press DISPLAY.
Each time you press the button, the display
changes as follows:
t Station name*
r
The preset number and the frequency
r
Clock display
* When the station is not labelled, the preset number
and the frequency are displayed automatically.
To erase the name
Do steps 1 to 4 and press CLEAR repeatedly until
the label disappears, then press ENTER/YES.
4 Press NAME EDIT.
The text input screen appears, and the cursor
flashes.
Cursor
5 Press CHARACTER repeatedly to
select the desired type of character.
Each time you press the button, the display
changes as follows:
A (Upper cases) t a (Lower cases) t 0
(Numbers) t ! (Symbols) t (Blank
space) t A (Upper cases) t
…
6 Press . or > repeatedly to select
the desired character.
To enter a blank space
Go to step 7 without pressing . or >.
You cannot enter a space as the first
character.
To enter a symbol
You can use the following 24 symbols.
! ” # $ % & ’ ( ) + , – . / : ; < = > ? @ _ `
7 Press CURSORt.
The character you selected in step 6 stops
flashing and the cursor shifts to the right.
Cursor