Filter
Top Products
ENGLISH
59
• Each time these buttons are pressed, the video
input source changes.
Press the CURSOR UP(
)/DOWN( )
buttons to select the CURRENT VIDEO.
1
Press the CURSOR LEFT( )/RIGHT( )
buttons to select the desired video input
source.
2
• Each time these buttons are pressed, the mode
changes as follows:
On : To turn on the current status display.
Off : To turn off the current status display.
Press the CURSOR UP( )/DOWN( )
buttons to select the OSD AUTO
DISPLAY.
1
Press the CURSOR LEFT( )/RIGHT( )
buttons to select the desired mode.
2
When selecting the OSD AUTO DISPLAY
• When the OSD AUTO DISPLAY is set to On, the
current status display overlaps the program image on
the monitor TV and may interfere with your movie
enjoyment. In such a case, set the OSD AUTO
DISPLAY to Off.
When selecting the CURRENT VIDEO
• You can select a video input source on the OSD
menu and enjoy its image.
VIDEO1 :
VIDEO2 :
VIDEO3 :
VIDEO4 :
IN2
None
None
IN1
COMPONENT VIDEO SETUP
RETURN:Back , :Select
Press the CURSOR UP( )/DOWN( ) buttons to select the COMPONENT VIDEO SETUP, then press
the ENTER button.
1
When selecting the COMPONENT VIDEO SETUP
• You should assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1~4.
(For details, refer to “CONNECTING VIDEO COMPONENTS” on page 6~7.)