Filter
Top Products
51
Press the CURSOR UP( )/DOWN( ) buttons to select the SPEAKER DISTANCE, then press the
ENTER button.
1
When selecting the SPEAKER DISTANCE
• Then “ ” and “ ” are moved to the unit mode.
• Each time these buttons are pressed, “Meters” or
“Feet” is selected.
• Once a unit is selected, the distances are
automatically changed in the selected unit.
Press the CURSOR UP(
)/DOWN( )
buttons to select the unit.
2
Press the CURSOR LEFT( )/RIGHT( )
buttons to select the desired unit.
3
RETURN:Back , :Select
SPEAKER DISTANCE
UNIT :
FL : 10 R : 10
FC: 10
SURR.(A) L : 10
SURR.(A) R : 10
SURR.(B) L : 10
SURR.(B) R : 10
BL : 10 R : 10
Feet
Repeat the above steps and until the distances are all entered.
6
Press the CURSOR LEFT( )/RIGHT( )
buttons to enter the distance from the
selected speaker to the listening position.
5
Press the CURSOR UP( )/DOWN( )
buttons to select the desired speaker.
4
• Then “ ” and “ ” are moved to its distance.
• You cannot select the subwoofer and the speakers
set to “None”.
• You can set the distance within the range of 0.3~9
meters in 0.3 meter intervals(or 1~30 feet in 1 feet
intervals)
ENGLISH