Filter
Top Products
ENGLISH
10
Front right
Front left
Surround A
right
Surround B
right
Surround A
left
Surround B
left
Surround back right
(or "Passive" subwoofer)
Center
Surround back left
9. CONNECTING SPEAKERS
• Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity(+ and -). If the
connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the
sound will be unnatural and lack bass.
• For installing the speakers, refer to “Speaker placement” on page 11.
• After installing the speakers, first adjust the speaker settings according to your environment and speaker layout.(For details,
refer to “SETTING THE SPEAKER SETUP” on page 49.)
• You can connect the surround and the surround back speakers with various combinations according to the usage purpose.
Surround speakers A and B
• This unit allows you to connect two different sets of surround speakers and to place them in the appropriate locations in your
room, resulting in enjoying both movie soundtracks and music listening with optimum surround sound and no compromise.
• However, if you have only a set of surround speakers, connect them to either SURROUND A or SURROUND B SPEAKER
terminals according to your taste.
Surround back speakers
• When using only one surround back speaker , you should connect it to SURROUND BACK LEFT channel. In this case, you
can connect a subwoofer without built-in amplifier to SURROUND BACK RIGHT channel.(For details, refer to “When selecting
the SUBWOOFER” on page 53.)
• If you assign the power amplifier for the surround back channels to the ROOM 2, this unit can drive the speakers in another
room(ROOM 2).
(For details, refer to “ROOM 2 connections” on page 12. and “SETTING THE POWER AMP ASSIGN” on page 49.)
Caution :
• For safe amplifier operation, in case of using either surround A or surround B speakers, use all the speakers with impedance
of over 6 ohms. However, in case of using both surround A and surround B speakers, use only these speakers with
impedance of over 12 ohms and other speakers with impedance of over 6 ohms.
• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the
speakers.