Filter
Top Products
52
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the DOLBY VS(Virtual Speaker) mode as
desired.
2
• Each time these buttons are pressed, the Dolby
Virtual Speaker mode changes as follows :
On : Select this to activate the Dolby Virtual Speaker
function.
Off : Select this to cancel it.
Press the CURSOR UP( )/DOWN( ) buttons to select the VIRTUAL SPEAKER SETUP, then press
the ENTER button.
1
When selecting the VIRTUAL SPEAKER SETUP
RETURN:Back , :Select
VIRTUAL SPEAKER SETUP
DOLBY VS :
SPEAKER LAYOUT:
2 -SPEAKER
MODE:
WIDE
Off
Press the CURSOR UP( )/DOWN( )
buttons to select the SPEAKER LAYOUT
mode.
3
Press the CURSOR LEFT( )/RIGHT( )
buttons to select the desired mode.
4
• You can select the desired one of four speaker
layouts for actual speakers to be used .
• Each time these buttons are pressed , the speaker
layout mode changes as follows :
2- SPEAKER : Select this when using 2 front
speakers.
3- SPEAKER : Select this when using 2 front and
center speakers.
4- SPEAKER : Select this when using 2 front and
2 surround speakers.
5- SPEAKER : Select this when using 2 front, center
and 2 surround speakers.
Note :
• When the speakers are set to “None”, the corresponding
speaker layout modes cannot be selected.
ENGLISH