Filter
Top Products
ENGLISH
58
• Each time these buttons are pressed, the modes change
as follows:
CINEMA EQ :
TONE DEFEAT :
Off
Off
TONE CONTROL
BASS
-----
-----
0
dB
TREBLE
-----
-----
0
dB
RETURN:Back , :Select
Press the CURSOR UP( )/DOWN( ) buttons to select the TONE CONTROL, then press the
ENTER button.
1
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired mode.
3
When selecting the TONE CONTROL
When CINEMA EQ mode is selected
• When the pure audio function is activated, the cinema
EQ function cannot be activated.
On : Select this to compensate for edgy or shrill movie
sound tracks.
Off : Select this to cancel the cinema EQ function.
When TONE DEFEAT mode is selected
On : Select this when listening to a program source
without the tone effect.
Off : Select this when adjusting tone for your taste.
Note :
• When the tone defeat mode is set to On, the tone (bass
and treble) cannot be adjusted.
When the tone defeat mode is set to Off to
adjust the tone (bass and treble)
1. Press the CURSOR UP( )/DOWN( ) buttons to
select the desired tone mode.
2. At the desired tone mode, press the CURSOR
LEFT(
)/RIGHT( ) buttons to adjust the selected
tone as desired.
• The tone level can be adjusted within the range of -10
~+10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB(flat level).
• Extreme settings at high volume may damage your
speakers.
3. To complete tone adjustment, repeat the above steps 1
and 2.
Note:
• When the pure audio function is activated, the TONE CONTROL cannot be selected.
• Each time these buttons are pressed, “
” and “ ”
are moved to the corresponding mode.
Press the CURSOR UP(
)/DOWN( ) buttons to select the desired item.
2