Filter
Top Products
Controls and Connections - Front Panel
1. On/Off Switch: Turns the base station on/off
2. [Menu] and [Set] buttons: Used to select menus and
set options on the LCD.
3. Backlit LCD w/Contrast Adjust: Adjust the level of
contrast to the LCD.
4. [Up] and [Down] buttons: Used to select menus and
set options on the LCD.
5. Peak Aux Level Light: Will flash red when the aux-
iliary input level into the base station is high.
6. Peak Matrix Level Light: Will flash red when the
intercom input levels into the base station are high.
7. Talk Light: Green when the talk button is active. Will
turn red when the microphone level into the local head-
set is high.
8. Talk Button: Press to enable the audio path from the
headset.
9. Headset Volume: Used to adjust the volume level out to
a headphone.
10. Microphone Gain: Adjusts the audio gain from the
local headset microphone.
11. Local Headset Connector: Female XLR connector.
A dynamic or electret headset microphone is automatically
detected.
2-1
RKP-4B Base Station
Section
2
Figure 2-1
RKP-4B -Front Panel
Figure 2-2
Local Headset Wiring