Filter
Top Products
7. [MENU] and [SET] buttons: Used to select menus and
set options on the LCD.
8. LCD (Liquid Crystal Display)
9. [UP] and [DOWN] buttons: Used to select beltpack
options on the LCD.
10. Headset Connector: Female XLR connector. A dynamic
or electret headset microphone is automatically detected.
11. Battery Latch: Press down to enable the battery pack to
be released. While the latch is held down, slide the bat-
tery pack about 1/8 inch back, toward the latch, until it
stops, then lift out.
12. Receive and Transmit Antennas: The antennas are
screw type, ¼ wave, replaceable antennas. The color dot
on the screw end of the antenna must match color dot on
antenna receptacle.
3-2
Figure 3-2
RKP-4 Rear Panel/Connector/Antennas
Figure 3-3
Headset Jack Wiring