Filter
Top Products
25
Chapter 1 Quick Start
Chapter 1
fig.1-20a.e
fig.1-21.e
* About PEDAL, TRIG 1, and TRIG 2, see p. 72–p. 73.
U0101A* PAD SET
Pitch +200cent
Value
Parameter
Edit Target
(Pad Set, Ribbon, D Beam, etc.)
Patch Number
appears if the Value is edited
"A", "B", or "C" appears
when "Pad Set" is selected
0 – 127
EZ Edit — Parameter List
0 – 127
0 – 127
Adjusts the volume of the entire patch.
Give the pattern a name of up to 10 characters.
PAD SET,
RIBBON L,
RIBBON R,
D BEAM,
PEDAL,
TRIG 1,
TRIG 2
REVERB
MULTI-FX
PATCH LEV
PATCH NAME
Inst
Type
Fx Rev Send
MasterVolume
Selects the instrument for Pad Set A, B, C
(Ribbon, D Beam).
Adjusts the volume.
Adjusts the pitch of the sound.
Adjusts the duration (decay time).
Adjusts the pan (localization) of the output sound.
Adjusts the reverb depth.
Turns the multi-effects and LFO on/off.
If you select PadData, this will be determined
by the on/off setting in Edit mode (p. 36).
Selects the type of the reverb.
Adjusts the overall reverb depth.
0 – 127
Adjusts the depth of reverb applied to the
sound processed by the multi-effects.
0 – 127
Adjusts the output volume of the multi-effects.
Selects the type of the multi-effects.
Adjusts the depth of the multi-effects.
0 – 127
Level
Pitch
Decay
Pan
ReverbSend
MULTI-FX/LFO
Depth
Type
Depth
FxOut Volume
OFF, ON,
PadData
0 – 127
-31 – +31
L63 – R63,
Random,
Alternate
-2400 – +2400
Refer to Effect
Type List (p. 95)
Refer to Effect
Type List (p. 95)
Refer to "Naming
a Patch" (p. 55)
* PadData can be
selected for PAD SET.
Refer to Pad Set
Instrument List
(p. 94)
Pads can be selected by five sets.
Random: The pan changes randomly each time the pad is struck.
Alternate: The pan alternates left and right each time the pad is struck.