Polycom C16 Speaker System User Manual


 
Command Protocol Reference Guide
A - 79
Description
This parameter sets the amount of time (in milliseconds) it takes the
compressor to ramp the gain up to the target gain once the input signal level
drops below the compressor threshold.
dp_comp_en Enable Compressor
Description
This parameter enables (1) or disables (0) the compressor function of the
dynamics processor. This parameter and dp_en must be enabled for the
compressor to function.
dp_comp_ratio Compressor Ratio
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
Default 0
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: 1.0, Maximum: 100.0, Resolution: 0.1
Default 2.0
User Limits
Supported
No