Filter
Top Products
30
<PRE1269>
En/Fr
En
Functions of the remote control unit
* Operations performed by buttons marked can also be
carried out by using buttons with the same name on the
main unit. (See p. 26.)
1 Record muting button (•) ( ) (See p. 64.)
2 FADER button (See p. 64, 90.)
3 TRACK NO. WRITE (MANUAL) button ( )
(See p. 66.)
4 RANDOM button (See p. 90.)
5 REPEAT button (See p. 90.)
6 Stop button (7) ( )
7 Numeric buttons (1 to 10, >10)
8 Program button (PGM) (See p. 94.)
9 Program check button (CHECK) (See p. 96.)
0 Record buttons (¶ REC) ( ) (See p. 52. and
54.)
NOTE:
For recording, press the 2 buttons simultaneously.
- Manual search buttons (1/¡) ( )
(See p. 86.)
= Track search buttons (4/¢) ( )
(See p. 86.)
~ Play button (3) ( )
! Pause button (8) ( )
@ TIME button ( ) (See p. 36.)
# Program clear button (CLEAR) (See p. 96.)
CONTROLS, CONNECTORS AND INDICATORS (REMOTE CONTROL UNIT)
7 Remote controllable range
÷ Point the remote control unit and press its buttons.
Caution on the remote control operation
÷ Remote control may be impossible if there is an obstacle
between the remote control unit and main unit or if the
remote control unit is operated at too great of an angle
from the remote control sensor.
÷ Erroneous operation may occur if strong light such as di-
rect sunlight or fluorescent lamp light is incident to the
remote control sensor.
÷ The main unit may operate erroneously if it is used near
equipment radiating infrared rays or if the infrared remote
control unit of other equipment is used near the unit. On
the contrary, if this remote control unit is operated near
another piece of equipment which can be controlled with
infrared rays, the equipment may operate erroneously.
÷ Replace batteries when the remote controllable range
decreases noticeably.
Remote control sensor
30
30
7m(23 ft)