Panasonic SC-BT07 Home Theater System User Manual


 
43
RQT9483
Speaker installation option
You can attach all of the speakers (except subwoofer) to a wall.
The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and speakers.
Attaching to a wall
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
Reattaching the speaker cables
4.0 mm
7.5 mm to 9.4 mm
At least 30 mm
3 mm to 5 mm
Wall or pillar
DO
NOT
DO
Attach to a wall without the base and the stand
72 mm
348.5 mm
In this position,
the speaker will
likely fall if
moved to the
left or right.
Move the
speaker so that
the screw is in
this position.
Front and surround speaker
Center speaker
190 mm
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
120 mm
Optional speaker
settings
SCBT207GN-RQT9483-L.book 43 ページ 2009年5月25日 月曜日 午後9時36分