Filter
Top Products
39
RQT9483
“Sound”
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (> 55) for late night viewing.
≥On ≥Off
≥Auto: Effective only when Dolby TrueHD is played.
Digital Audio Output
≥Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHD
Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS
Digital Surround, DTS-HD High
Resolution Audio or DTS-HD Master
Audio is output in “Bitstream” or
“PCM” format.
≥Not making the proper settings may
result in noise.
≥
If the unit is connected with the HDMI AV
OUT terminal, the specifications of the
connected equipment take preference
over this unit and audio selected in these
items may not be output (e.g., when a
television is connected, the HDMI audio
output of this unit is limited to
down-mixed 2ch.)
≥Bitstream:
Select “Bitstream” when the connected equipment can decode the
respective audio format.
–Connect equipment supporting HDMI (High Bit rate Audio) and use a
High Speed HDMI Cable in order to output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
≥PCM:
Select “PCM” when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify whether
or not they can decode each of the audio formats.
DTS/DTS-HD
MPEG Audio ≥Bitstream: When connected to equipment with a built-in MPEG
decoder.
≥PCM
: When connected to equipment without a built-in MPEG
decoder.
BD-Video Secondary Audio [BD-V]
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (> 22)
≥On: The primary audio and secondary audio are mixed and output.
The sampling frequency is converted to 48 kHz.
≥Off
: The clicking sound on the menu and secondary audio are not
output.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
more.
≥Signals are converted to 48 kHz despite the settings across in the
following cases:
–when the signals have a sampling frequency of over 192 kHz
–when the disc has copy protection
–when “BD-Video Secondary Audio” is set to “On”
≥On: Signals are converted to 48 kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96 kHz.)
≥Off
: Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set
to “Bitstream”, there are no downmix effects for the outputted
audio.
≥The audio will be outputted in “Stereo” in the following cases.
–AVCHD playback
–Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
≥Stereo
: When connected to equipment that does not support
the virtual surround function.
≥Surround encoded: When connected to equipment that supports the
conversion from 2 channels to multi channel
surround.
High Clarity Sound
When the analogue video terminal is not being used, the electrical
current that flows through the analogue video circuit can be
stopped. This prevents adverse effects on the audio signals and
produces clearer sound.
≥This works only when “BD/DVD”, “SD” or “USB”is selected as the
source.
≥Set to “Enable” and then set “High Clarity Sound” on the
on-screen menu to “On”. (> 37)
≥Use this when outputting image via HDMI AV OUT terminal.
Analogue image will not be output via COMPONENT VIDEO OUT
terminal or VIDEO OUT terminal.
≥Enable ≥Disable
Speaker Refer to page 42
“Display”
On-Screen Messages
Choose whether to show status messages automatically.
≥Automatic ≥Off
On-Screen Language
Choose the language for these menus and on-screen messages.
≥English
≥Français ≥Español
≥Deutsch ≥Italiano ≥Nederlands ≥РУССКИЙ
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”, the masked-off area on the screen
becomes grey.
[Only when connecting with an HDMI cable or a component
video cable and “HDMI Video Format” (> 40) is set to any other
mode than “576p/480p”, or “Component Resolution” (> 40) is
set to “720p” or “1080i”]
≥On
:
If there is no operation for 5 minutes or more, the displayed screen switches
to the other states automatically.
–When the Direct Navigator or START menu is displayed, the display
returns to the screen saver mode.
–When CD or MP3 is played, the display returns to the screen saver
mode. (Playback continues.)
–When still pictures are shown (except for Slide Show), the display
returns to the Direct Navigator screen.
≥Off
FL Display
Changes the brightness of the unit’s display.
–The brightness of the volume indicator (> 6) is also changed.
≥Bright
≥Dim: The display is dimmed.
≥Automatic: The display is dimmed, but brightens when you perform
some operations.
Software Licence Information about the software used by this unit is displayed.
Advanced operations
SCBT207GN-RQT9483-L.book 39 ページ ２００９年５月２５日 月曜日 午後９時３６分