Panasonic SC-BT07 Home Theater System User Manual


 
19
RQT9483
Basic operation
To adjust the volume.
It is also possible to adjust the volume with the volume knob on the
main unit.
To mute the sound.
Instructions for operations are generally described using the remote control in these operating instructions.
Preparation
Turn on the television and select the appropriate video input on the television.
VOLUME
SURROUND OUTPUT
TUNE
SELECTORSETUP MIC
SD CARD
Stop Play
,VOLUME
Skip/Search/Slow-motion
SD CARD
Headphones (not included)
Headphone plug type: 3.5 mm stereo
mini plug
Reduce the volume before connecting.
Audio is automatically switched to 2ch
stereo.
To prevent hearing damage, avoid
listening for prolonged periods of time.
Excessive sound pressure from
earphones and headphones can cause
hearing loss.
Label facing up
1 Press [< OPEN/CLOSE] to open the disc tray.
2 Insert or remove the disc.
Inserting or removing an SD card
1 Pull to flip down the front panel.
2 Insert the SD card into the SD card slot.
To remove the card, press on the center of the card
and pull it straight out.
Press [< OPEN/CLOSE] again to close the disc tray.
DVD-RAM: Remove discs from their cartridges before use.
Insert double-sided discs so the label for the side you want to play is
facing up.
Insert the card label
up with the cut-off
corner on the right.
Press on the
center of the card
until it clicks into
place.
Inserting or removing a disc
Inserting or removing a USB device
1 Pull to flip down the front panel.
2 Insert the USB device into the USB port.
Before inserting any USB device to this unit, ensure that the data stored therein has been
backed up.
Check the orientation of the USB connector and insert it straight in.
Some USB devices inserted into this unit may cause this unit to stop operating.
Such USB devices cannot be used on this unit.
To remove the USB device, complete all USB device-related
operations and pull the USB device straight out.
About the use of USB device
Since the physical size of USB device can vary, please consider its width when connecting
any USB device to this unit. It is possible that some devices may accidentally activate the
playback button and cause this unit to not operate properly.
In such cases we recommend using a USB extension cable (not included).
1 Press [Í] to turn on the unit.
2 Insert the media (D above).
Play start.
If play does not start, press [1PLAY].
If the media with data in different file formats is inserted, the file
selection menu is displayed. Press [3, 4] to select the desired file
format and press [OK].
If the menu is displayed, press [3, 4, 2, 1] to select the item and
press [OK].
If the screen prompting you to use the colour buttons appears,
continue to operate with the colour buttons on the remote control.
Press to adjust the volume
Press to mute the sound
“MUTE” flashes on the unit’s display.
To cancel, press [MUTE] again or
adjust the volume.
Muting is cancelled if the unit is
turned off.
e.g., Display
VOL
MUTE
Signal from PAL discs is output as PAL. Signal from
NTSC discs is output as “NTSC” or “PAL60”. You can
select “NTSC” or “PAL60” in “NTSC Contents Output” for
NTSC discs. (> 38)
DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [STOP] when you finish to preserve
the unit’s motor and your television screen.
If a media is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
The producers of the disc can control how discs are
played. So you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
When playing a set of two or more BD-Video discs, the
menu screen may continue to display even if the disc has
been ejected.
To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX]
Press [TOP MENU/DIRECT NAVIGATOR].
To show Pop-up menu [BD-V]
The Pop-up menu is a special feature available with some
BD-Video discs. This menu may vary with discs. For the
operating method, refer to the instructions for the disc.
1) Press [POP-UP MENU].
2) Press [3, 4, 2, 1] to select the item and press [OK].
Pop-up menu also appears by pressing [OPTION] and
selecting “Pop-up Menu”.
Press [POP-UP MENU] to exit the screen.
It may take time to read BD-Video discs that include BD-J
(> 55).
NOTE
TIPS
Playback
SCBT207GN-RQT9483-L.book 19 ページ 2009年5月25日 月曜日 午後9時36分