Filter
Top Products
47
Operations
Other Information
Timer playback (component system operation)
When connected to the R-801A component,
playback using the timer is possible. For more
information on how to set the timer, refer to the
instruction manual with the R-801A.
1 Insert a disc for playback.
2 Set the timer for the R-801A.
Display messages
Message Explanation Pages
Open Disc tray is opening.
Welcome Disc tray is closing.
Rec Setup Setting initial settings for recording. Please wait. 23
TOC Reading Reading the table of contents recorded on the disc. Please wait.
PMA Writing Recording TOC data to the disc PMA (Program Memory Area). 18
Never turn off the power while this message is displayed.
Wait Writing or reading of data for track names is taking place during the finalization of
a disc or during the restoring of a disc to its pre-finalization state. 39, 42
Erasing Erasing all tracks or the last track. Wait until the process is completed. 40, 41
No Track The tracks are not entered, but the disc name is.
If during operation a malfunction occurs or an improper operation is performed, the corresponding message
will appear. For a description of these messages, refer to the explanations on the following pages.
Other Information