Filter
Top Products
12
Part names and functions
The numbers within the brackets are the pages
where the part is introduced.
RC-448C remote controller
1 STANDBY/ON button [20]
Press to switch the CDR-201A between the on
state and the standby state.
2 RANDOM (random playback) button [45]
Press to playback the tracks on the disc in
random order.
3 MEMORY (programmed playback) button
[46]
Press to program the tracks to play in memory.
4 Numeric buttons [36, 46]
Press the number for a track to start playback at
that track. Also, press to program tracks for
programmed playback.
Alphabetic letters/Symbols/Numeric/(1 to
10) buttons [36]
Press to enter a disc name and track titles.
5 d/f (rewind/fast forward) buttons
[36, 44]
Press to rewind or fast forward through the
track currently playing. Press to move the cursor
forward or backward when changing the name
of a disc.
6 o REC (recording) button [23]
For analog and digital recording, press to place
the CDR-201A in the recording standby state.
7 g (pause) button [44]
Press during playback to pause the playback.
Press the s button to resume playback.
8 r (tray open/close) button [20]
Press to open and close the disc tray.
9 REPEAT (repeat playback) button [45]
Press to repeat the playback of a disc or a track.
10 NAME button [34]
Press to begin entering a disc name or track
titles. Also press this button to confirm the name
you input.
11 SCROLL button
Press to scroll a displayed disc name or track
titles.
12 CLEAR button [36, 46]
Press to erase the programmed tracks one at a
time from the end. This button is also used to
erase the character entered.
13 ENTER button [36]
Press to enter and confirm a disc name, artist
name, or track titles.
14 DISPLAY button [33, 35]
Press to change the contents of the display.
15 OPERATION button
e (stop) button [28, 44]
Press to stop recording or playback.
s (play) button [26, 44]
Press to start analog recording, digital recording,
and playback.
q/w (skip) buttons [36, 44]
Use to jump to tracks prior to or later than the
one currently playing. Use while playback is
stopped to select the track to play.
For the part names and functions of the RC-466S
remote controller, refer to the instruction manual
with the R-801A.
STANDBY/
ON OPEN
/
CLOSE
RANDOM MEMORY REPEAT
NAMEABC DEF
231
SCROLL
GHI MNOJ
K
L
456
CLEAR
DISPLAY
ENTER
PQRS TUV W
XYZ
10
/
0
>
10
789
REC
REMOTE CONTROLLER
RC
-
448
C
9
8
12
11
10
13
15
2
3
1
4
6
7
5
14