Filter
Top Products
37
Operations
Entering names
Entering track names
1 Turn the MULTI JOG dial to select the
desired track.
During playback, pause, or recording, the track
selected currently will be named.
PUSH TO ENTER
MULTI JOG
4 Press the YES button to end name
input.
Or, press the NAME button on the remote
controller (RC-448C).
YES
CDR-201A
RC-448C
NAME
AUDIO CD RECORDER
DISPLAY
STANDBY / ON
STANDBY
INPUT
CD
DUBBING
REC
FINALIZE
EDIT / NOYES
PUSH TO ENTER
MULTI JOG
CDR
-
201A
STANDBY/
ON OPEN
/
CLOSE
RANDOMMEMORYREPEAT
NAMEABC DEF
231
SCROLL
GHI MNOJ
K
L
456
CLEAR
DISPLAY
ENTER
PQRS TUV W
XYZ
10
/
0
>
10
789
REC
RC-448C
NAME
EDIT/NO
YES
q MULTI JOG w
To write the entered names to the disc
Finalize the disc.
The names you enter are temporarily stored in the
CDR-201A and then written to the disc during
finalization. Be aware of the following notes when
finalizing a disc.
Note:
If you enter a disc name and remove the disc
without finalizing it, the name will not be stored.
You will need to enter the name again.
2 Press the EDIT/NO button and turn the
MULTI JOG dial until " Name In?"
appears.
Or, press the remote controller NAME button.
Pressing the NAME button proceeds to the state
after step 2 is complete (go to step 3).
EDIT / NO
PUSH TO ENTER
MULTI JOG
CDR-201A RC-448C
NAME