95
In case of difficulty
Knowledge sections
Handling of MD
As the MD is accommodated inside a cartridge, it can be handled without caring about dust or fingerprint. How-
ever, stained or soiled cartridge may cause malfunction. To enjoy beautiful sound for extended period of time,
take care on the following points.
Storage position
Do not leave MDs in places where the temperature
and/or humidity are extremely high (for example, in
places subjected to direct sunlight).
Dust countermeasure
The shutter of the disc cartridge is permanently open
while the disc is loaded in the set. Therefore, to pre-
vent dust from penetrating inside the disc, take the
disc out of the unit immediately after completion of
recording or playback.
Care
Periodically wipe off dust and dirt on the cartridge
with a dry cloth.
Note on disc accessories
Do not use lens cleaner for this may lead to malfunc-
tion of the unit.
Write protect tab
To protect recorded contents against accidental era-
sure, set the write protect tab of the disc open. Re-
turn the tab to the original position when you want to
record signals on the disc.
Write protect tab
Slide open.
(Recording disabled)
Do not touch the disc directly.
Do not touch the disc by opening the shutter with
your hand. The cartridge will be damaged if it is
forced open.
Back side of
the disc
Note on the cartridge labels
Apply each label firmly to every corner so that it will
not peel off.
US and foreign patents licensed from Dolby Labora-
tories.
Do not attempt to record or edit a disc in which MD-Clip data (still images, etc.) have been recorded. Otherwise, the Clip
data may be lost.
Caution on MD-Clip data
Important Items
Slide close.
(Recording enabled)