Filter
Top Products
80
MD Edit Functions
Application section
Each press of the 4 or ¢ keys switches the op-
eration.
1 "DISC" : Disc title *1
2 "001", "002"..... : Track title *2
3 "ALL ERASE" : Complete erasure of disc
and track titles
4 "[1]", "[2]", "[3]": Title Memo *3
Activate the title input mode.
1
1 Press the TITLE INPUT key.
2 Select the title to be edited.
3 Set the title to be edited.
In case of track title :
Select the desired track No. (The track can also be
selected using the numeric keys.)
In case of disc title :
Select "DISC"
When titles are input in discs and tracks, the titles can be displayed when they are played back. The follow-
ing procedure can also be used to modify or erase input titles.
Assigning a title to a disc or track
Select the "MD" input
⁄
Up to 1792 characters can be input per disc and up
to 80 characters can be input per track. (In case of
alphanumeric and symbol characters)
A space (blank character) also required the same
amount of data as alphanumeric characters. When
deleting a title, it is not recommended to overwrite
spaces on previous characters but use the (CLEAR/
DELETE) function. A
Total number of title characters
When step 1
-
1 is performed in stop mode, the dis-
play starts with the disc title.
Each press of the 4 or ¢ key displays a track title
in sequence from “001”, “002”.... When all track titles
have been displayed, 3 then 4 will be displayed.
Each press of the 4 or ¢ key causes the selected
title memo number to blink, after which 1 then 2 will
be displayed.
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
TITLE INPUT
4¢
P.CALL
SET
To return To advance
To abort operation, press the TITLE INPUT key
again.
÷ With a track without a title, the display shows " ".
List of registered symbols (ASCII codes):
! “ # $ % & ’( ) * + , - . / : ; < = > ` ? @ _ ˆ
ISDC
÷÷÷÷÷÷
010
÷ ÷÷÷÷÷÷
Disc titles can be assigned in stop mode. When the
MD6 key pressed before step 1-3 while assigning
a title to a track, the title can be entered while listen-
ing to that track.
With an MD track recorded in the "LP2" or
"LP4" recording mode using the stamping
function, "LP:" will be input at the beginning
of the track title. q
Press in stop mode