Filter
Top Products
87
Timer operation
Application section
Listening to an AUX input source
Connect the related equipment under reference to "Connection of external source component"
9
1 Press the AUX key.
2 Play the connected equipment.
3 Adjust the volume.
AUX
Each press switch the modes as follows.
1 "AUX" (Analog)
2 "DIGITAL AUX" (Digital)
1 Press the AUX key.(Select the "AUX" input)
2 Press the MODE key.
3 Turn the VOLUME/MULTI CONTROL knob
to select "INPUT LEVEL", then press the
SET/ DEMO key.
4 Adjust the input level.
5 Set it.
PUNI T LEVEL
UXA INPUT+1
Each press switch the modes as follows.
1 "AUX" (Analog)
2 "DIGITAL AUX" (Digital)
Input level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUDIO AUX IN
terminal. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD or MD.
(Main unit operation only)
Adjusting the AUX Input Level
AUX
MODE
VOLUME/
MULTI CONTROL
SET/DEMO
\
VOLUME/
MULTI CONTROL
The level
increases
The level
decreases
SET/DEMO
÷ Adjustment is possible over the range from
-
4 to + 3.
÷ Adjusting the input level control also varies the record-
ing level from the input source connected to the AUX
input jacks.
VOLUME/
MULTI CONTROL