Filter
Top Products
40
Recording on MD
Basic section
With recording of CD playback, either the digital output or analog output can be recorded as required.
(In recording of a disc source other than CD on MD, the recording source is set automatically to the
"ANALOG" audio.)
Selecting the recording input signal (REC INPUT)
1 Press the DVD/CD 6 key
2 Press the MODE key
3 Turn the VOLUME/MULTI CONTROL knob to select
"REC INPUT", then press the SET/DEMO key.
4 Turn the VOLUME/MULTI CONTROL knob to select
"DIGITAL" or "ANALOG", then press the SET/
DEMO key.
REC INPUTindicator
ECR INPUT
DIGITAL
DIGITAL
The level for recording the digital input signal from an auxiliary source component such as a satellite
tuner or MD recorder can be adjusted.
(The recording level of the audio selected in "Selecting the recording input signal (REC INPUT)" can be
adjusted.)
Adjust the recording level (REC LEVEL)
Level value
Adjust so that these segments
light at times.
ECR LEVEL
+1
1 Press the MODE key
2 Turn the VOLUME/MULTI CONTROL knob to
select "REC LEVEL", then press the SET/
DEMO key.
3 Adjust the recording level (-
oo ~ +12) by rotat-
ing the VOLUME/MULTI CONTROL knob.
4 Press the SET/DEMO key to set the selection.
Input level