Filter
Top Products
49
Changing the initial setup (DVD)
Application section
Change the content of the selected item.
3
Press either cursor key (5 ∞) to change the
setting, then press the ENTER key.
"Rating"
"TV Aspect"
"TV Mode"
"OSD Position"
"8 No Limit" : Select to enable playback of any DVD discs whether their targets are
adults, general public or children.
"7" to "1" : When DVD software containing the recording of restriction level (an adult-
oriented disc or a disc including violence), playback is restricted in accordance
with the restriction level.
"0 Lock All : Select to inhibit any DVD. Use this setting for example when you want
to inhibit playback of an adult-oriented DVD which does not contain the restriction
information.
"Change Password": Select to change the viewing restriction password which has
been registered before. (This item cannot be selected unless a password has al-
ready been registered.)
"Temporary Unlocked": Select to disable temporarily the viewing restriction which
has been set previously. (This item cannot be selected unless a password has
been set previously.)
"4 : 3" : Select when the connected TV uses the conventional aspect ratio of 4:3.
"16 : 9" : Select when the connected TV uses the wide-screen aspect ratio of 16:9.
Widescreen video will be reproduced in full screen. (Set the screen mode of the
TV to the full mode.)
"Pan & Scan" : Select to play widescreen software with pan & scan specification on
a pan & scan screen (screen with the left and/or right edges cut off). When
widescreen software without pan & scan specification is played with this setting,
it will be reproduced in the Letterbox screen mode.
"Letterbox" : Widescreen software without pan & scan specification is reproduced
in the Letterbox screen (screen with black bands on the top and bottom).
"Normal" : Select to display the OSD and messages on the top of the TV screen.
Usually select this setting.
"Cinema" : Select to display the OSD and messages on the lower part of the TV
screen. Select this setting when the OSD or messages are deviated outside the
TV screen.
Function items Setting items
ENTER
5
5
\
(When you attempt to
change the rating level, the
password input screen will
be displayed. p)
MAIN
TV Mode
OSD Position
On Screen Message
IPB Display
Rating
7
TV Aspect
7
16:9
7
4:3
÷ Select " " and press the ENTER key to return to the set-
ting menu. (Pressing the RETURN key or cursor (2) key
also returns to the previous setting menu.)
Continued on next page