Filter
Top Products
51
Changing the initial setup (DVD)
Application section
ENTER
"SOUND" is to be selected when you want to set the audio output method when system components are
connected using the digital audio output connector of the player. Also select "SOUND" to set audio output
during DVD or VCD search and dynamic range control function.
"SOUND" Setting
Select "SET UP MENU SOUND".
1
1 Press the SET UP key.
2 Press either cursor (5 ∞) key to select
"SET UP MENU SOUND", then press the
ENTER key.
SET UP
Select the item to be set.
2
Press either cursor (5 ∞) key to select the
item to be set, then press the ENTER key.
5
5
\
ENTER
Digital Audio
Dolby Digital
Audio During Search
Dynamic Range Control
PCM Down Conversion
SOUND
7
On
7
Bitstream
7
Bitstream
7
Bitstream
7
On
7
Wide
"Digital Audio PCM Down Conversion" Setting
Switches on/off the down-sampling conversion for the
digital signal output with a high sampling rate.
"Digital Audio Dolby Digital" Setting
Sets the Dolby Digital output.
"Digital Audio DTS" Setting
Sets the DTS output.
"Digital Audio MPEG" Setting
Sets the MPEG output.
"Audio During Search" Setting
Switches on/off the audio during search.
"Dynamic Range Control" Setting
Switches the dynamic range control function.
When "SOUND" is selected in "SET UP MENU":
Select the "DVD/CD" input.
¢
Continued on next page
SOUND
SET UP MENU
EXIT
÷ Press the RETURN key or cursor (3) key while the
"SET UP MENU" menu is displayed to exit from the
setup mode.
÷ Press the cursor (3) key while a setting menu is
displayed to exit from the setup mode. (Pressing
the RETURN key or cursor (2) key returns to the
"SET UP MENU".
5
5
\
ENTER
Press in stop mode