Filter
Top Products
74
MD Edit Functions
Application section
TRACK EDIT
Play the track to be divided.
Press the TRACK EDIT key at the desired position.
The following procedure shows how to divide a track by assigning a track number in the desired position
in the track. For example, by inserting an additional track number before the passage you are specially
fond of, it is easy to skip to there when you play the disc later. After the track number has been divided, the
track numbers after it will be adjusted automatically.
Dividing a track (DIVIDE)
Select the "MD" input
⁄
÷ When dividing a track, set the dividing point at more
than 2 seconds after the beginning of the track. A track
may not be able to be divided if one of the divide tracks
would become shorter than about 2 seconds.
÷ Pressing the key in the middle of playback initiates
pause.
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step 3.
1
2
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
1 Press the TRACK EDIT key.
2 Select "DIVIDE".
3 Set it
SET
4¢
P.CALL
Each press of the 4 or ¢ keys switches the op-
eration.
1 "DIVIDE"
2 "COMBINE"
3 "ERASE"
4 "MOVE"
DIVIDE
After editing, eject and remove the MD.
Up to 255 track numbers can be inserted addition-
ally by repeating 1 to 3 for each of them.
÷ There is no blank space left between the two tracks.
÷ Track division may sometimes be impossible due to
the limitations of the MD standard.
÷ The MD recorder enters pause mode at the beginning
of the track newly created by division.
Display after execution
"EDIT NOW" = "COMPLETE"
(When editing is completed successfully)
"EDIT NOW" = "CAN' T EDIT"
(When editing is impossible)
3
ENTER
1<0 >0020ok