Filter
Top Products
78
MD Edit Functions
Application section
Select "ERASE".
Erasing a single track (ERASE)
Execute the track erasure operation.
1 Press the TRACK EDIT key.
2 Select "ERASE".
3 Set it.
Play the track to be erased.
Select the "MD" input
⁄
During playback, it is possible to erase only the track being played. The track numbers of the tracks after
the erased track will be adjusted.
1
2
3
ENTER
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Display after execution
"EDIT NOW" = "COMPLETE"
(When editing is completed successfully)
"EDIT NOW" = "CAN' T EDIT"
(When editing is impossible)
SET
4¢
P.CALL
After editing, eject and remove the MD.
4
MD 0
Each press of the 4 or ¢ keys switches the op-
eration.
1 "DIVIDE"
2 "COMBINE"
3 "ERASE"
4 "MOVE"
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step 3.
TRACK EDIT
Information is
being written.
MD has been ejected.
ERASE
1E0 RASE0ok
÷ The MD editing is established finally at the moment the
MD disc is ejected.
RIW TING
JEECT
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.