Kenwood HM-DV6MD Stereo System User Manual


 
90
Timer operation
Application section
Setting an everyday timer program
Two timer programs (PROG.1, PROG.2) are available. Both of them are 24-hour timer programs which can
be executed every day. In each of PROG.1 and PROG.2, the timer data including the operating period and
played contents can be set and selected to be activated or not as required.
÷ It is possible to execute both timer reservation programs PROG.1 and PROG.2 simultaneously.
÷ The time zones of PROG.1 and PROG.2 should be set by reserving an interval of 1 minute or more so that they are
not overlapped.
Make preparations for the play (recording).
Select the timer number.
÷ If you make a mistake, press the MODE key and restart
from step 2.
÷ When a timer setting has already been made in the se-
lected timer, the setting will be overwritten by the new
setting.
1 Press the MODE key.
2 Turn the VOLUME/MULTI CONTROL knob
to select "TIMER SET", then press the SET/
DEMO key.
3 Turn the VOLUME/MULTI CONTROL knob
to select "PROG.1 SET ?", then press the
SET/ DEMO key.
1
2
Recording or playing the AUX source component
To listen to radio
To listen to CD, MP3
The station should be preset
prior.
Insert a disc. (Program playback is
not possible.) ¢
To listen to MD
Load a disc.(Program playback is
not possible.)
For timer playback or timer recording of a source component connected
to the AUDIO AUX IN jacks, connect it properly by referring to "Connec-
tion of Other Accessories". 9J
For recording
Make preparations for recording.
°
Example for playing radio broadcast from 10:30am
to 11:30am using PROG.1
MODE
Adjust the clock before setting the timer
&
TIMRSEET
Set the ON time then the OFF time.
÷ For each of the ON time and OFF time, enter the figure
of “hour” by performing steps 1 and 2 then enter the
figure of “minute” in the same manner.
÷ If you make a mistake, press the MODE key and restart
from step 2.
3
1 Adjust the time.
2 Set it.
The time is
advanced
The time is
returned
VOLUME/
MULTI CONTROL
SET/DEMO
NO310: 0am
FFO311: 0am
It is not recommended to play a DVD VIDEO or VCD disc using the timer function, for expected playback may
sometimes unavailable with these discs.